User Manual

Set up
16 MMS
®
Inspection SPG High
3 Set up
3.1 Installing batteries
Battery polarity
Observe the correct polarity when
inserting the batteries!
Damage to the gage
The use of defective batteries or the
wrong type of battery causes
damage to the gage. Leaking
batteries destroy the gage's elec-
tronics.
► Use only undamaged batteries.
► Use only the following battery
types:
Alkaline, 1.5 V, AA - LR6
Lithium 1.5 V, AA - LR6
NiMH rechargeable, 1.2 V, AA
- HR6
Rechargeable batteries cannot
be charged in the gage
Individual rechargeable batteries in
the gage cannot be charged via the
USB port
► Use a commercially available
charger to charge individual
rechargeable batteries.
3.2 Switching on the gage
► Press the key for approx.
1 s.
► Measurement in air: Hold the
gage in your hand and press
OK.
The display shows the main
menu or measurement view for
the batch that was open at shut-
down.
3.3 Switching off the gage
► Press the key for approx.
1 s.
What you can do next
• Setting the language: Main
Menu () > Gage Settings > OK
> Language > Select the desired
language > OK > 2 x
• Create a new batch, page 20
• Settings for measurement,
page 18