User Manual

MMS
®
Inspection SPG High 43
Glossary
>USL Number of measured readings above the upper specification limit
R Range R equals the difference between the largest measured reading
(maximum) and the smallest measured reading (minimum) in a series of
measurements
s Standard deviation from the mean value
LSL Lower specification limit
<LSL Number of measured readings below the lower specification limit
V[%] Coefficient of variation, percent variation of a series of measurements,
standard deviation from the mean value
x Location value; Maximum value, mean value or mean value (Max-Min/
2) from i single readings measured in one location
x
Block mean value of a measurement block with n location values
3/12 Number of values already measured (determined) / specified block size
(example: 3 values from a total of 12 measured; Block size = 12)
Zero Zero calibration step must be carried out