User Manual

4 MMS
®
Inspection SPG High
Description
2 Description
The gages in the MMS Inspection
SPG series measure the surface
roughness of blasted surfaces easily,
quickly and in a nondestructive man-
ner. Gage construction with an inte-
grated measuring probe allows sin-
gle-hand measurements on flat sam-
ples.
This operator's manual describes the
following gage version in the MMS
Inspection SPG series:
• High variant
USB and WiFi interfaces, data
storage for 250 000 measured
readings in 2500 batches, dis-
plays the measured reading ac-
quisition (optically and
acoustically) as well as by vi-
brating the gage
Additional information can be found
in the data sheet, page 11
2.1 Measurement view
(example)
1 Batch name
2 Specification limits
3 Current measured reading
4 Progress display, number of
measurements per location
5 Statistical values (Block no.,
block mean value (x
), Min.-/
Max. values, Location value (x)
6 Key assignment line (example:
delete symbol, open block
statistics, symbol for opening
calibration)
7 Battery indicator
8 Unit of measurement
A list of all display symbols and texts
can be found starting on page 41.
1
2
3
2
4
5
6
Batch 001
No 1 n 4
x 65.42 s 4.8
Min 60.2 Max 70.7
BLOCK
65.1
µm
75
50
Example of Measurement
view showing statistics with
set specification limits
7
8