User Manual

ManualsBrandsHELMUT FISCHER ManualsElectronicsCoating Thickness Measuring Device

Table Of Contents

MMS

Inspection DFT

Batch Template Packages Templates for Creation Measurement Tasks

Only available for gage variant High

Industrial

The packages contain various batch types. That are batch templates with especially designed

measurement tasks for specific coating thickness measurement applications.

Template package contains following batch types:

• Individual

Batch template for free configuration: All metrological standard functions are available

and calibration method Zero + 1 Foil is used

• Elementary

Template with minimum configuration: No further metrological function settings (customiz-

able), only calibration method Zero is used

• Smooth Surface

Preconfigured batch template for measurements on smooth surfaces: Settings of tolerance

limit values (customizable) and calibration method Zero + 1 Foil is used.

• Rough Surface

Preconfigured batch template for measurements on rough surfaces: Display and storage

of the mean value of a given number (n) of measurements (customizable, single readings

are also stored) and the calibration method Zero + 2 Foils is used.

Corrosion

Only available for gage variant High

Template package containing batch types with especially designed measurement tasks for mea-

surements of corrosion-protective coatings. The template package contains following batch types:

• Individual

Batch template for free configuration: All metrological standard functions are available

and calibration method Flexible is used

• IMO PSPC

Preconfigured batch template containing 90/10 rule, calibration method and evaluation

for coating thickness measurement according to requirements of "Performance Standard

for Protective Coatings" of the International Maritime Organization (IMO PSPC), calibra-

tion method 2 Foils is used

• SSPC PA2

Preconfigured batch template with settings (partly customizable), calibration method and

evaluation regulations for coating thickness measurement according to guideline SSPC-

PA2 of the Society for Protective Coatings (SSPC), calibration method 2 Foils is used

• ISO 19840

Preconfigured batch template with settings (partly customizable), calibration method and

evaluation regulations for coating thickness measurement according to standard

ISO 19840, calibration method 2 Foils is used

• AS 3894.3

Preconfigured batch template with settings (partly customizable), calibration method and

evaluation regulations for coating thickness measurement according to Australian stan-

dards AS 2331.1.4 and AS 3894.3-B, calibration method 1 Foil is used

• SIS 184160

Preconfigured batch template with settings (partly customizable), calibration method and

evaluation regulations for coating thickness measurement according to Swedish standard

SIS 184160, calibration method 2 Foils is used

Metrological Standard Functions Measurement Tasks

Batch File containing all metrological function settings and the linking to calibration necessary for the

measurement task as well as the measured readings and evaluations

Block creation Measured readings grouped in measurement blocks

Tolerance limits/Nominal thickness Adjustable, depending on the selected batch type for the gage variant High

Offset value/Correction value Adjustable, is deducted automatically from the measured reading. Thus, one obtains the thickness

of the top coating if for instance the interim coating is known.

Measurement reading acquistion

Automatic upon placement of the gage probe