User Manual

MMS
®
Inspection DFT High 17
Setup
3 Setup
3.1 Installing batteries
Battery polarity
Observe the correct polarity when
inserting the batteries!
Damage to the instrument
The use of defective batteries or the
wrong type of battery causes
damage to the gage. Leaking
batteries destroy the gage's elec-
tronics.
► Use only undamaged batteries.
► Use only the following battery
types: Alkaline, 1.5 V, AA - LR6
Lithium 1.5 V, AA - LR6
NiMH rechargeables, 1.2 V,
AA - HR6
Rechargeable batteries cannot
be charged in the gage
Individual rechargeable batteries in
the gage cannot be charged via the
USB port.
► Use a commercially available
charger to charge individual
rechargeable batteries.
3.2 Switching on the gage
► Press the key for approx.
1 s.
The main menu appears in the
display or the measurement
view for the batch that was
open at shutdown.
3.3 Switching off the gage
► Press the key for approx.
1 s.
What you can do next
• Setting the language: Main
Menu () > Gage Settings > OK
> Language > Select the desired
language > OK > 2 x
• Create a new calibration,
page 28
• Create a new batch, page 20