User Manual

Table Of Contents

MMS

Inspection DFT High 19

Settings for measurement

5 Settings for measurement

In order to measure, you need to create and open a Batch (measuring appli-

cation file). In a batch, you define the Measuring application and settings for

the measurement procedure, e.g. whether the specification limits are to be

monitored during the measurement or whether the measurement readings are

to be grouped in measurement block. The link to the Calibration to which the

measurements are referenced is also saved in the batch file.

If any parameter changes, there is a new measuring application and you have

to create a new batch.

Overview of the possible settings you have to make before a measurement

Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page

Creating a new batch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Opening a batch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Assigning a different calibration to the opened batch. . . . . . . . . . . . . . 22