User Manual

MMS
®
Inspection DFT High 21
Settings for measurement
setting with OK. Switch to the measurement view for the newly created
batch: MEASURE > OK.
This completes the creation process for a new batch.
What you can do next
• Measure, see Page 23
• Assign a different calibration to the batch, see page 22
5.2 Opening a batch
Before you start
• The gage is switched on ( key)
Opening an existing batch
1. Main Menu () > Batches
2. Select the desired batch from the list:
3. Tap on OK, to confirm your selection
4. MEASURE > OK
The measurement view for the selected batch opens
What you can do next
• Measure, see Page 23
• Repeat calibration, recalibration, see page 28
• Assign a different calibration to the batch, see page 22