User Manual

42 MMS
®
Inspection DFT High
Glossary
Measuring application
A measuring application is characterized not only by the material properties
and the geometric shape of the Sample, but also by the measuring settings,
e.g. limit monitoring and measurement reading grouping. If any one of these
parameters changes, there is a new measuring application and you have to
create a new Batch with appropriate Calibration.
Reference part
see under Calibration standards
Sample
• Coated part/surface having any shape and size the coating thickness of
which needs to be measured.
• Large surface with several measurement locations
Zero
see under Calibration standards