User Manual

MMS
®
Inspection DFT High 1
Safety information
1 Safety information
If you use the instrument as intended and observe the safety information, the
instrument poses no danger.
Please read and follow this Operator's Manual and observe the safety infor-
mation. Also observe generally applicable safety and accident prevention reg-
ulations.
1.1 Intended use
The gage is intended solely for measurement of coating thicknesses.
Only accessories approved or recommended by the manufacturer may be con-
nected to the gage.
Any use beyond this is not the intended use. The risk of damage ensuing there-
from is borne solely by the user.
1.2 Environmental conditions
Storage and transport temperature: 0 … +60 °C
Temperature
When exposed to sunshine, the areas behind glass windows (e.g. in an
automobile) can easily reach temperatures in excess of +60 °C. This can
cause damage to the instrument.
► Do not keep or store the instrument and accessories behind glass
windows, or near to sources of heat such as radiators etc.!
Acid
The gage and accessories are not acid-proof.
► Do not place the instrument or accessories in contact with acids or liquids
which contain acid!