User Manual

MMS
®
Inspection DFT High 3
Description
2 Description
The gages in the MMS Inspection DFT
series measure coating thicknesses
easily, quickly and in a nondestruc-
tive manner. Gage construction with
an integrated measuring probe al-
lows single-hand measurements, pref-
erably on flat and cylindrical sam-
ples.
This operator's manual describes the
following gage variants in the MMS
Inspection DFT series:
• High variant
in the types Fe and Fe+NFe,
USB and WiFi interfaces, data
storage for 250 000 single
readings in 2500 batches,
batch template packages for
general industrial use as well as
specifically for use in the field of
corrosion protection
Additional information can be found
in the data sheet, page 9
2.1 Measurement reading view
(example)
1 Measuring application
NF/FE: Nonferrous coating material on
ferrous base material
NC/NF: Electrically nonconducting and
nonferrous coating material on electri-
cally conducting nonferrous metals
2 Batch name (batch type abbrev.)
3 Tolerance limits
4 Measurement reading
5 Statistics values
6 Key assignment line (example:
delete symbol, open block statis-
tics, symbol for opening calibra-
tion)
7 Battery indicator
8 Unit of measurement
A list of all display symbols and texts
can be found starting on page 43.
1
2
3
4
3
5
6
NF/FE
Batch 01 (IDV)
No 1 n 10
X 46.8 s 1.81
Min 44.9 Max 48.5
BLOCK
47.3
µm
44.5
49.0
Example of the measurement
reading view showing statis-
tics with set tolerance limits
7
8