User Manual

MMS
®
Inspection DFT High 5
Description
2.3 Keys
There are 4 keys for operating the gage.
The bottom line of the display always shows the functions of the 4 keys (see
illustration below). The assignment depends on the opened menu page.
The function shown on the display is assigned to the key directly underneath (example).
The key has two functions:
• It switches the gage on and off when the key is held for at least 1 s
• Function shown in the bottom line of the display
The  key has two functions:
• It moves the cursor/mark down when is shown in the bottom line of
the display
• It opens the main menu when is not shown in the bottom line of the
display
A description of the remaining key symbols can be found starting at page 43
SEL