Instructions / Assembly

Loading Ramps
Aluminum Folding with Handles
8’ Extended—4’ Folded
Operation
and
Safety
Remove Ramps from carton or box.
Instructions for Using Ramps
Step Action
1
2
Before use; first inspect ramps for any dam-
age, bent parts or damage to hinge.
3
Unfold ramps and apply proper end to truck
or dock and other end to ground or lower
level. (As shown in fig. 1)
4
Be sure load is evenly distributive and does
not exceed 1200 lbs per ramp (2400 lbs per
pair).
Ramps ends need to be secure and level at
contact to truck/dock & ground/lower level.
5
SAFETY PRACTICES:
Do Not over load Ramps,
Weight to be distributed evenly.
Weight Capacity
- 1200 lbs. per ramp
- 2400 lbs. per pair
Beware when ramps are in use
to stay clear of equipment roll-
ing towards you.
Beware of wet and slippery sur-
faces, do not use under these
conditions.
Be sure both ends of ramps are
securely and completely level
when in use.
Be sure ramps are used on
solid ground, do not use in sand
or on soft soil.
Use Caution. Keep
ramps away from
electrical Hazards.
Inspect Ramps daily
before use.
Truck or
Dock
Ground or
lower level
Fig: 1
8’