Datasheet

Germany and other countries: LASER COMPONENTS GmbH, Phone: [phone], Fax: [phone], [e-mail]
USA: LASER COMPONENTS IG, Inc., Phone: [phone], Fax: [phone], [e-mail]
Great Britain: LASER COMPONENTS (UK) Ltd., Phone: [phone], Fax: [phone], [e-mail]
France: LASER COMPONENTS S.A.S., Phone: [phone], Fax: [phone], [e-mail]
Automotive
Datasheet Plastic Collimator Lens CAW100
These data concern a full plastic a-spherical lens. It is for use as a collimator in combination with a
diode laser. It can be mounted by use of glue or spring-loaded. Mechanical lock-mounting is not
advisable because of possible distortions.
© Helvoet Rubber & Plastic Technologies NV. All rights reserved. Reproduction prohibited without written permission from the copyright owner
Parameters
Wavelength Unit
785 nm
Design conditions
N.A.
0.195 --
Clear Aperture CA (Exit Pupil) 3.9 mm
Clear Aperture CA (Entrance Pupil) 3.4 mm
Optical parameters
Focal Length @ 785 nm mm
9.85
RMS mean on axis 40
mλ
RMS max. (±3σ)
on axis 50
mλ
Optical Tolerance 0.15 mm
Field Radius 0.15 mm
Mechanical parameters
Mounting hole diameter D
mh
∅ 5.20 (+ 0.1)
mm
Environmental stability
Storage Temperature 0 to 65 °C
Operating Temperature 0 to 65 °C
General Data:
Transmission [%]: > 80
Lens Material: COC
Specifications subject to change without notice.