Datasheet

5722 650 3418
Philips Competence Centre Plastics B.V.
Optical Components
specification sheet
190-1
page 1/1
1997-12-10 1999-07-
13
author: G Verkade
5722 600 20173

N.V. PHILIPS' ELECTRONICS
All rights are reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner.
Alle rechten voorbehouden. Verveelvoudiging, geheel of gedeeltelijk
is niet toegestaan dan met schriftelijke toestemming van de auteursrechthebbende.
Datasheet Plastic Collimator Lens CAX100
These data concern a full plastic aspherical plano-convex lens. It is specified for use as a collimator in
combination with a diode laser. It can be mounted by use of glue or spring-loaded. Mechanical lock-
mounting is not advisable because of possible distortions.
Parameters
Wavelength Unit
670 nm
Design conditions
N.A. 0.20 --
Clear Aperture CA 4.1 mm
Designed with laser cover glass (BK7) on source side:
Distance from source 0.55 mm
Glass thickness 0.25 mm
Optical parameters
Focal Length 10.0 mm
Back Focal Length BFL
(incl BK7-glass)
mm
Free Working Distance FWD
9.21
8.48 mm
RMS mean on axis 35 mλ
RMS max. (±3σ) on axis 80 mλ
Optical Tolerance 0.1 mm
Field Radius 0.2 mm
Mechanical parameters
Mounting hole diameter D
mh
∅ 6.28 mm
Other parameters: see drawing
Environmental stability
Storage Temperature -25 to 100 °C
Operating Temperature -10 to 75 °C
General Data:
Transmission [%]: 90
Lens Material: Polycarbonate
Specifications subject to change without notice.
Zemax catalogue file available.