Installation Guide

For customer support please visit www.hembrycreek.com or call 866 395 8112 weekdays 8:00 to 5:00 EST or fax [phone] any time
INSTALLATION INSTRUCTIONS
GLASS COUNTER TOP
INTEGRAL OVAL BASIN
(all sizes)
SUGGESTED TOOLS AND MATERIALS
Clear Silicone Sealant Level Tape Measure Safety Glasses
10'
GLASS TOP INSTALLATIONS
1. Install the cabinet / vanity according to the cabinet / vanity manufacturer
2. Check to make sure the vanity top sits level on top of the vanity
3. If all four corners of the vanity top do not sift flush on the vanity, use the optional leveling spacers (included)
to help level the vanity top
4. Apply silicone sealant to the top of cabinet / vanity as shown above
5. Install faucet and and drain assembly per the manufacturers' instructions
** NOTE: top style, shape, cutout on top,
vanity may vary from the picture above.
Instructional purposes only.
CARE AND CLEANING
For best results in caring for your glass top, we suggest:
- Always wipe off spills immediately.
- Never use strong / abrasive cleaner. Always test your cleaning solution on unnoticeable areas before applying to
the entire surface.
- Wipe surfaces clean, immediately after applying cleaner.
- Do not allow cleaner to sit or soak. Never let cleaners sit on the surface of the glass top for long periods of time.
- Use a soft, dampened sponge and cloth. Never use an abrasive material such as brush or scouring pad to clean
surfaces. They will scratch the surface of the glass top and lavatory.
- Always rinse and wipe clean the fixtures to prevent soap buildup.
Apply bead of quality clear sillicon sealant
evenly along the top of the vanity.
Apply clear silicone sealant evenly along the
bottom of backsplash and wall.
Finally, place the bottom side of back splash with
sealant onto the countertop and check alignment
of backsplash. Adjust the leg levelers as needed.
Step 1: Step 2:
Silicone Sealant