Installation Guide

SUGGESTED TOOLS AND MATERIALS
Sealant Tape Measure Safety Glasses
10'
1
VESSEL TOP INSTALLATION
3
INSTALLATION INSTRUCTIONS
REFLEX GLASS VESSEL TOP
CARE AND CLEANING
For best results in caring for your Reflex glass top, we suggest:
- Always wipe off spills immediately.
- Never use strong / abrasive cleaner. Always test your cleaning solution on unnoticeable areas before applying to
the entire surface.
- Wipe surfaces clean, immediately after applying cleaner.
- Do not allow cleaner to sit or soak. Never let cleaners sit on the surface of the glass for long periods of time.
- Use a soft, dampened sponge and cloth. Never use an abrasive material such as brush or scouring pad to clean
surfaces. They will scratch the surface of the glass top and lavatory.
- Always rinse and wipe clean the fixtures to prevent soap buildup.
2
For customer support please visit www.xylem.biz or call 866 395 8112 weekdays 8:00 to 5:00 EST or fax [phone] any time
Apply bead of quality sealant evenly
along the top of the vanity
Apply silicone sealant evenly along
the bottom of backsplash and wall
Place the bottom side of back splash with sealant
onto the countertop and check alignment of backsplash.
Adjust the leg levelers as needed
4
Carefully, install the vessel sink, mounting ring
and drain. See manufacturers instructions
** NOTE: Sink style, shape, cutout on top, vanity may vary from the picture above. Instructional purposes only
™
by XYLEM
all models