User Manual

30 31

Setup and Operation

3.10 Programming the user times

For programming the signal time for monostable output signals, 9 fixed signal

times between 0.02 s and 10 s are available. In addition, three different signal

times between 0,01s and 599,99s can be set by the user. The outputs are

deactivated if the setting is 0.00 s.

Programming

mode

Select a

position

Set position Save and go to the

next user setting; after

user 3, return to dis-

play mode

Keep pressed and

switch voltage on

simultaneously

press press press

Function code Fn, Display-Row 1

Function No.

Display

Row 2

Sets the

Signal

Times

Signal time 1

Signal time 2

Signal time 3

Setup and Operation

3.11 Output of ID data

This function is used to retrieve ID data, e.g. article numbers and various ma-

nufacturing data.

Output mode Change to the next

output

Return to counter ope-

ration

Keep pressed and

switch voltage on

simultaneously

press press

Display row 1 Display row 2

Article number

Manufacturing date

Serial number

Software number

Software release