User Manual

72 73
Function code F3, Display Row 1:
PNP/NPN-
Logic
0
NPN 8 V-Level
1*
PNP 8 V-Level
2
NPN TTL-Level
3
PNP TTL-Level
Function code F4, Display Row 1:
Input
damping
(Attenua-
tion)
0
30 Hz damping (attenuation)
(e.g. for mechanical contacts)
1*
F max. (see chapter 4 and 10)
Function code F5, Display Row 1:
Set / Re-
set- Mode
0*
Reset to 0
1
Automatic set to 0
after reaching Preset value 2
2
Set to Preset 2
3
Automatically sets to Preset 2
after reaching 0.
Timer
Function code F6, Display Row 1:
dynam/
static
Reset
0*
Static Reset (as long as the signal is
applied)
1
Dynamic Reset (ready to count after
reset, even if reset signal is applied for
a longer time)
Function code F7, Display Row 1:
Timer-
Mode of
Operation
0
Cumulative measurement - pulse-
width (counts as long as Input A is
active)
1*
Cumulative measurement – cycle du-
ration (counts from rising edge of
start signal to rising edge of stop sig-
nal).
2
Cumulative measurement -
A=Run B=Stop
(counts from rising edge of start sig-
nal to rising edge of stop signal).
3
Single-pulse measurement – pulse-
width (counts as long as Input A is
active)
4
Single-pulse measurement – cycle du-
ration (counts from rising edge of
start signal to rising edge of stop sig-
nal).
5
Single-pulse measurement - A=Run
B=Stop (counts from rising edge of
start signal to rising edge of stop sig-
nal)
Timer