User Manual

VI VII
1 General Information
1.1 Information about the Operating Instructions
These operating instructions provide important information about the hand-
ling of the multifunctional counter. To ensure safe operation it is vital that the
safety information and instructions be strictly observed.
For Counters with interfaces Tico 773 and Tico 774 please see the amendment
0 773 001
The multifunctional counter has been designed for industrial use and for ins-
tallation in machinery or industrial plants.
The manufacturer of the machine/plant in which the multifunctional counter
is used has to ensure that the function of the counter is properly described in
the Operating Instructions of the machine or plant, and that the description is
in accordance with manufacturer’s programming functions.
The manufacturer’s safety rules shall be applicable.
In addition, the local regulations concerning the prevention of accidents and
general safety information applicable to the machinery/plant shall be adhered
to.
Before starting any work on the machine/plant, the operating instructions and
in particular, the Safety chapter and the respective safety information must be
fully read.
These operating instructions are an integral part of the product and must be
maintained in the direct vicinity of the machine/plant and in a place that is
readily accessible for the operating staff.
These operating instructions contain important information concerning the in-
stallation, connection and programming of the multifunctional counter.
General Information