User Manual

8 9
Description of the programming sequence:
- Programming of the basic functions
- Programming of the function codes
- Programming of the user times
- Programming of the prescaler
- Programming of the presettings
Before starting to run the machine/plant, all functions that are not allowed to
be changed by the operator have to be blocked.
The executed programming functions have to be
documented.
1.2 Explanation of symbols
The warnings in these operating instructions are designated by symbols. Signal
words at the beginning of the warnings indicate the severity of a safety ha-
zard.
These notes have to be observed by all means, and all actions have to be taken
with utmost care so as to prevent any accidents or damage or personal injury.
Danger!
This warning indicates a direct safety hazard,
which may lead to serious injuries or even death if
preventative action is not taken.
Warning!
This warning indicates a possible safety hazard,
which may lead to serious injuries or even death if
preventative action is not taken.
General Information
Caution!
This warning indicates a possible safety hazard,
which may lead to minor damage or injuries if
preventative action is not taken.
Note!
This symbol indicates a potentially hazardous
situation, which may lead to damage to property
or to the environment if preventative action is not
taken.
Tips and recommendations
This symbol is used to point out to useful tips and
recommendations and information ensuring effici-
ent and trouble-free operation.
1.3 Limitation of Liability
The information and notes contained in these operating instructions were
gathered in accordance with the applicable standards and regulations, the
state-of-the-art, as well our long-standing experience and know-how.
The manufacturer shall not assume any liability for damage caused by:
- Non-adherence to the operating instructions
- Improper use
- Employment of unskilled or untrained personnel
- Makeshift changes or manipulation
- Opening of the multifunctional counter
As a result of special design versions, special ordering options or the latest
technical developments, the actual scope of delivery may deviate from the
scope described and illustrated here.
General Information