User Manual

68 69
D batch mode: The timer can also be programmed to act as a batch counter.
In this case, P 2= main preset value; P 1= Batch preset.
In the Batch mode of operation, only positive entries are possible for P1;
negative entries will be stored as positive values.
This mode is ideal to default a process time and the number of process se-
quences (runs).
Additional totalizer:
The additional totalizer is used to sum up all the times (even after repeated
resetting of the main counter). The totalizer is reset separately.
7.2 Signal Diagrams - Input signals
Timer
F7 = 0 Cumulative Measurement acc. to F7 = 3 Single-pulse Measurement acc. to
pulse-width measuring principle pulse-width measuring principle
Input A
Input B
InputC
Reset
Input A
Input B
Input C
Reset
Input A
Input B
Input C
Reset
Stop Stop Start Stop
tratS
tratS
Stop
Start Stop Start Stop Start Stop
tratS
tratS
Stop Start Stop
Time Display
Time Display
Time Display
Start Stop Stop Start Start Stop
F7 = 0 Cumulative measurement acc. to
cycle-duration measuring principle
F7 = 0 Cumulative measurement acc. to
cycle-duration measuring principle
F7 = 0 Cumulative measurement acc. to
A = Run, B = Stop
F7 = 0 Cumulative measurement acc. to
A = Run, B = Stop
7.3 Signal Diagrams - Output signals
The output signals of the timer can be derived from the pulse counter (see 5.3)
or, respectively, batch counter (see 9.2) functions.
Timer
F7 = 0 Cumulative Measurement acc. to F7 = 3 Single-pulse Measurement acc. to
pulse-width measuring principle pulse-width measuring principle
Input A
Input B
InputC
Reset
Input A
Input B
Input C
Reset
Input A
Input B
Input C
Reset
Stop Stop Start Stop
tratS
tratS
Stop
Start Stop Start Stop Start Stop
tratS
tratS
Stop Start Stop
Time Display
Time Display
Time Display
Start Stop Stop Start Start Stop
F7 = 0 Cumulative measurement acc. to
cycle-duration measuring principle
F7 = 0 Cumulative measurement acc. to
cycle-duration measuring principle
F7 = 0 Cumulative measurement acc. to
A = Run, B = Stop
F7 = 0 Cumulative measurement acc. to
A = Run, B = Stop