User Manual

86 87
8.5 Programming the Shift Counter Function Codes
Programming
mode
Change func-
tion setting
Save and change
to next function
Return to dis-
play mode
+
or
Keep pressed and
simultaneously
turn
Voltage On
press press press
Alternative dis-
play of
Function codes
+
The function codes are displayed as
text in row 1. By pressing both keys
simultaneously you can change to
the numerical display (F 0 to F 35).
After pressing these keys once again
the number of the selectable op-
tions will be displayed in addition.
This setting will be stored.
Function code F0, Display Row 1:
Function No. Display Row 2
Factory
Setting
(Defaults)
0*
No function
1
All function codes are set to the va-
lues marked with *
Shift Counter
Function code F1, Display Row 1:
Input A Input B Input C
Counter
mode of
Operation
0
Adding Subtracting Reset
1*
Adding Adding Reset
Function code F3, Display Row 1:
PNP/
NPN-Lo-
gic
0
NPN 8 V-Level
1*
PNP 8 V-Level
2
NPN TTL-Level
3
PNP TTL-Level
Function code F4, Display Row 1:
Input
Attenuat.
0
30 Hz damping (attenuation); e.g. for
mechanical contacts
1*
F max. (see chapter 4 and 10)
Shift Counter