Data Sheet

For situations where the host product manufacturer is responsible for an external connector, for
example with an RF pin and antenna trace design, the integration instructions shall inform the
installer that unique antenna connector must be used on the Part 15 authorized transmitters used
in the host product. The module manufacturers shall provide a list of acceptable unique
connectors.
Explanation: The EUT has one PCB Antenna, The antenna cannot be removed, Unconventional
interface
2.8 Label and compliance information
Grantees are responsible for the continued compliance of their modules to the FCC rules. This
includes advising host product manufacturers that they need to provide a physical or e-label
stating “Contains FCC ID” with their finished product. See
Guidelines for Labeling and User
Information for
RF Devices – KDB Publication 784748.
Explanation:The host system using this module, should have label in a visible area indicated the
following texts: Contains FCC ID: 2AW8C-LJCM39
2.9 Information on test modes and additional testing requirements5
Additional guidance for testing host products is given in KDB Publication 996369 D04 Module
Integration Guide. Test modes should take into consideration different operational conditions for a
stand-alone modular transmitter in a host, as well as for multiple simultaneously transmitting
modules or other transmitters in a host product.
The grantee should provide information on how to configure test modes for host product
evaluation for different operational conditions for a stand-alone modular transmitter in a host,
versus with multiple, simultaneously transmitting modules or other transmitters in a host.
Grantees can increase the utility of their modular transmitters by providing special means, modes,
or instructions that simulates or characterizes a connection by enabling a transmitter. This can
greatly simplify a host manufacturer’s determination that a module as installed in a host complies
with FCC requirements.
Explanation: WiFi Module can increase the utility of our modular transmitters by providing
instructions that simulates or characterizes a connection by enabling a transmitter.
2.10 Additional testing, Part 15 Subpart B disclaimer
The grantee should include a statement that the modular transmitter is only FCC authorized for the
specific rule parts (i.e., FCC transmitter rules) listed on the grant, and that the host product
manufacturer is responsible for compliance to any other FCC rules that apply to the host not
covered by the modular transmitter grant of certification. If the grantee markets their product as
being Part 15
Subpart B compliant (when it also contains unintentional-radiator digital circuity), then the grantee
shall provide a notice stating that the final host product still requires Part 15 Subpart B compliance
testing with the modular transmitter installed.
Explanation: The module without unintentional-radiator digital circuity, so the module does not
require an evaluation by FCC Part 15 Subpart B. The host shoule be evaluated by the FCC
Subpart B.