Corp. Fryer User Manual
Model 290
Problem Cause Correction
SHORTENING FOAMING/DRAINING SECTION
Foaming or boiling • Water in shortening • At end of a Cook Cycle,
over of shortening drain shortening and clean
frypot; add fresh shortening
• Condensation line stopped up • Remove and clean condensation
line
• Improper or bad • Use recommended
shortening shortening
• Improper filtering • Refer to the procedure
covering filtering the shortening
• Cold zone full of cracklings • Filter shortening
• Improper rinsing after • Clean and neutralize the
cleaning the fryer frypot; rinse with vinegar
to remove the alkaline, then
rinse with hot water and
dry frypot
Shortening will • Drain valve clogged with • Open valve - push cleaning
not drain from frypot crumbs rod through drain opening from
inside of frypot
Shortening leaking • Obstruction in drain • Remove obstruction
through drain valve
• Faulty drain valve • Replace drain valve
1103 1-8