Corp. Fryer User Manual

Model 690
2-30 507
2-32. NYLATRON STRIPS
REPLACEMENT (CONTD)
9. Lift the front shroud up and out, over the arm of the lid.
10. Thread the new nylatron strip through the track in the front
shroud.
11. Lining up the holes in the strips, f t the front shroud back
over the lid arms.
12. Secure the strips to the weight assembly.
13. Replace back shroud, top cap, and lid, and replacement is
complete.
2-33. LUBRICATING LID The lid rollers, in the back of the fryer, should be lubricated at
ROLLERS least once a year, to allow the lid easy movement.
1. Remove the back shroud of the fryer.
2. Using spindle lube, part number 12124, place a small
amount of lube on both top and bottom rollers. Make sure
to lube both left and right rollers.
3. Clean the inside of back shroud and the back of the fryer.
4. Replace the back shroud.