SDS

Henry
®
336 Floor Primer & Latex Liquid Additive Page 1 of 7
23-Apr-2015
MATERIAL SAFETY DATA SHEET
Manufacturer’s name and address:
The W.W. Henry Company
400 Ardex Park Dr.
Aliquippa, PA 15001 USA
Supplier’s name and address:
Refer to Manufacturer
Information Telephone No. : [phone]
Website Address : http://www.wwhenry.com
24 Hr Emergency Telephone # : CHEM-TEL: [phone] OR 1-813-248-0585 (call collect)
Product Identifier : Henry
®
336 Floor Primer & Latex Liquid Additive
Chemical Name : N/Ap Chemical Family : Mixture
Chemical Formula` : N/Ap Trade Name/Synonyms : Henry 336
Molecular Weight : N/A Material Use : Water based latex additive.
Uses Advised Against : No Information available.
GHS Classification per 29 CFR 1910.1200 (OSHA HCS 2012) and HPR (WHMIS 2015)
Not classified as hazardous.
GHS Pictograms
None.
Signal Word
None.
Hazard Statements
None.
Safe Handling Instructions: Avoid eye and skin contact. It is recommended to use safety glasses and
gloves during handling. During installation process, adequate ventilation of the
work area should be maintained. Although the adhesive is low VOC, persons
who are sensitive to odors or chemicals should avoid the work area during
installation. Keep container closed.
Hazards Not Otherwise Classified
None.
% With Unknown Acute Toxicity
None.
Ingredients
CAS #
% (by weight)
No hazardous ingredients
N/Ap
100
General : Call a doctor if you feel unwell.
Inhalation : If a worker develops breathing problems while working with this material, remove
the worker to fresh air and keep at rest in a position comfortable for breathing.
Skin contact : Wash with plenty of soap and water. If irritations or symptoms develop, seek
medical attention/advice.
SECTION 1 – IDENTIFICATION
SECTION 2 – HAZARDS IDENTIFICATION
SECTION 3 – COMPOSITION/INFORMATION ON INGREDIENTS
SECTION 4 – FIRST AID MEASURES