MSDS

ManualsBrandsHenry ManualsKitchen430 4-gal. ClearPro VCT Adhesive

HENRY

430 @ Lowes Clear VCT Adhesive

Page 1 of 6

MSDS Preparation Date (mm/dd/yyyy): 06/21/2012

MATERIAL SAFETY DATA SHEET

SECTION 1 - IDENTIFICATION

Product identifier :

HENRY

430 @ Lowes Clear VCT Adhesive

Henry 430

Trade Name/Synonyms :

Adhesive for installation of Vinyl Composition Tile (VCT).

Product Use :

Chemical Family : Mixture

Refer to Manufacturer

Supplier’s name and address:

Manufacturer’s name and address:

The W.W. Henry Company

400 Ardex Park Drive

Aliquippa, PA, U.S.A.

15001

(724) 203-8000 Visit our Website: http://www.wwhenry.com

Information Telephone #

CHEM-TEL: (800) 255-3924 (Within Continental U.S.); CHEM-TEL: +1 (813) 248-0585

(Outside U.S., please call collect).

24 Hr. Emergency Tel #

WHMIS classification:

This product is not a WHMIS controlled product in Canada. It does not meet any of the

criteria for a controlled product provided in Part IV of the Controlled Products Regulations

(CPR).

OSHA Classification: This product is considered to be a non-hazardous substance under

OSHA standard 29 CFR 1910.1200.

Classification

SECTION 2 - HAZARDS IDENTIFICATION

Emergency Overview

Beige paste. Mild odour.

May cause respiratory irritation. May cause gastrointestinal irritation.

Possible transient eye irritation. May cause mild skin irritation.

POTENTIAL HEALTH EFFECTS:

Signs and symptoms of short-term (acute) exposure

May cause mild transient irritation. May cause coughing and breathing difficulties.

Inhalation

Skin

May cause mild skin irritation.

Eyes

May cause mild transient irritation. Symptoms may include stinging and tearing.

May cause irritation of mouth, throat, and stomach. May cause nausea, vomiting, and diarrhea.

Ingestion

Prolonged skin contact may cause skin irritation.

Effects of long-term (chronic) exposure

See TOXICOLOGICAL INFORMATION, Section 11.

Carcinogenic status

Additional health hazards

See TOXICOLOGICAL INFORMATION, Section 11.

See ECOLOGICAL INFORMATION, Section 12.

Potential environmental effects

SECTION 3 - COMPOSITION/INFORMATION ON INGREDIENTS

Ingredients

CAS #

Wt.%

No hazardous ingredients

N/Ap

N/Av

Summary of content (6 pages)

PAGE 1
Page 1 of 6 HENRY® 430 @ Lowes Clear VCT Adhesive MSDS Preparation Date (mm/dd/yyyy): 06/21/2012 MATERIAL SAFETY DATA SHEET SECTION 1 - IDENTIFICATION Supplier’s name and address: Manufacturer’s name and address: Refer to Manufacturer The W.W. Henry Company 400 Ardex Park Drive Aliquippa, PA, U.S.A. 15001 HENRY® 430 @ Lowes Clear VCT Adhesive Product identifier : Trade Name/Synonyms : Henry 430 Product Use : Adhesive for installation of Vinyl Composition Tile (VCT).
PAGE 2
HENRY® 430 @ Lowes Clear VCT Adhesive Page 2 of 6 MSDS Preparation Date (mm/dd/yyyy): 06/21/2012 SECTION 4 - FIRST AID MEASURES Inhalation Skin contact Eye contact Ingestion Notes For Physician : Immediately remove person to fresh air. If breathing has stopped, give artificial respiration. Obtain medical attention if symptoms develop and persist. : Remove/Take off immediately all contaminated clothing. Wash affected areas with soap and water. If irritation or symptoms develop, seek medical attention.
PAGE 3
HENRY® 430 @ Lowes Clear VCT Adhesive Page 3 of 6 MSDS Preparation Date (mm/dd/yyyy): 06/21/2012 SECTION 7 - HANDLING AND STORAGE Safe Handling procedures : Use in a well-ventilated area. Wear suitable protective equipment during handling. Avoid breathing vapours. Avoid contact with skin, eyes and clothing. Keep away from extreme heat and flame. Avoid contact with incompatible materials. Wash thoroughly after handling. Storage requirements : Store in a cool, dry, well-ventilated area.
PAGE 4
HENRY® 430 @ Lowes Clear VCT Adhesive Page 4 of 6 MSDS Preparation Date (mm/dd/yyyy): 06/21/2012 Flame Projection Length : N/Ap Viscosity : 25,000 cSt Absolute pressure of container : N/Ap Flashback observed : N/Ap Section 10: Stability And Reactivity Stability and reactivity Hazardous polymerization Conditions to avoid : Stable under the recommended storage and handling conditions prescribed. : Hazardous polymerization does not occur. : Avoid heat and open flame. Keep away from direct sunlight.
PAGE 5
HENRY® 430 @ Lowes Clear VCT Adhesive Page 5 of 6 MSDS Preparation Date (mm/dd/yyyy): 06/21/2012 : If this product, as supplied, becomes a waste in the United States, it may meet the criteria of a hazardous waste as defined under RCRA, Title 40 CFR 261. It is the responsibility of the waste generator to determine the proper waste identification and disposal method. RCRA SECTION 14: TRANPORT INFORMATION Regulatory Information TDG Class Packing Group Not regulated. Not regulated none Not regulated.
PAGE 6
HENRY® 430 @ Lowes Clear VCT Adhesive MSDS Preparation Date (mm/dd/yyyy): 06/21/2012 Page 6 of 6 DSL: Domestic Substances List IARC: International Agency for Research on Cancer Inh: Inhalation LC: Lethal Concentration LD: Lethal Dose N/Ap: Not Applicable N/Av: Not Available NIOSH: National Institute of Occupational Safety and Health NTP: National Toxicology Program OSHA: Occupational Safety and Health Administration PEL: Permissible exposure limit RTECS: Registry of Toxic Effects of Chemical Substances ST