MSDS

HENRY
®
430 @ Lowes Clear VCT Adhesive
Page 3 of 6
MSDS Preparation Date (mm/dd/yyyy): 06/21/2012
Use in a well-ventilated area. Wear suitable protective equipment during handling. Avoid
breathing vapours. Avoid contact with skin, eyes and clothing. Keep away from extreme
heat and flame. Avoid contact with incompatible materials. Wash thoroughly after handling.
Safe Handling procedures
:
SECTION 7 - HANDLING AND STORAGE
Store in a cool, dry, well-ventilated area. Keep away from direct sunlight. Keep away from
incompatibles. Inspect periodically for damage or leaks.
Storage requirements
:
Incompatible materials
:
Metal salts.
Special packaging materials
:
Always keep in containers made of the same materials as the supply container.
SECTION 8 - EXPOSURE CONTROLS AND PERSONAL PROTECTION
Exposure Limits
ACGIH TLV
OSHA PEL
STEL
TWA
STEL
PEL
Ingredients
N/Ap
N/Ap
N/Ap
N/Ap
No hazardous ingredients
Ventilation and engineering measures
Use general or local exhaust ventilation to maintain air concentrations below recommended
exposure limits.
:
Respiratory protection
:
None required under normal conditions. If the TLV is exceeded, a NIOSH/MSHA-approved
respirator is advised.
Skin protection
:
Gloves impervious to the material are recommended. Advice should be sought from glove
suppliers.
Eye / face protection
:
Safety glasses with side-shields or chemical splash goggles.
Depending on conditions of use, an impervious apron should be worn. An eyewash station
and safety shower should be made available in the immediate working area.
:
Other protective equipment
General hygiene considerations
:
Avoid breathing vapors, fumes or dust. Avoid contact with skin, eyes and clothing. Do not
eat, drink, smoke or use cosmetics while working with this product. Remove soiled clothing
and wash it thoroughly before reuse. Upon completion of work, wash hands before eating,
drinking, smoking or use of toilet facilities.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical state
paste
:
Appearance
beige
:
Odour
mild
:
Odour threshold
N/Av
:
pH
8.5 - 9.5
:
Boiling point
1.045
:
Specific gravity
:
100°C (212°F)
Melting/Freezing point
N/Av
:
N/Av
:
Coefficient of water/oil distribution
Vapour pressure (mmHg @ 20° C / 68° F)
N/Av
:
Solubility in water
miscible
:
Vapour density (Air = 1)
N/Av
:
Evaporation rate (n-Butyl acetate = 1)
:
N/Av
Volatile organic Compounds (VOC's)
0 g/L
:
Volatiles (% by weight)
:
53- 55%
Flash point
> 93°C (> 199.4°F)
:
Flash point Method
N/Av
:
Auto-ignition temperature
Pensky Martens Closed
Cup
:
Lower flammable limit (% by vol.)
Upper flammable limit (% by vol.)
:
:
N/Ap
N/Ap