SDS

ManualsBrandsHenry ManualsKitchen430 4-gal. ClearPro VCT Adhesive

Henry

430 ClearPro



Clear VCT Floor Adhesive Page 1 of 7

01-Mar-2015

SAFETY DATA SHEET

Product Identifier : Henry



430 ClearPro



Clear VCT Floor Adhesive

Product Code : 70010432

Trade Name/Synonyms : Henry 430

Recommended Use : Adhesive for installing Vinyl Composition Tile (VCT).

Uses Advised Against : No information available.

Manufacturer’s name and address:

The W.W. Henry Company

400 Ardex Park Drive

Aliquippa, PA 15001 USA

Information Telephone No. : (800) 232-4832 or (724) 203-8000

Website Address : http://www.wwhenry.com

24 Hr Emergency Telephone # : CHEM-TEL: 1-800255-3924 OR 1-813-248-0585 (call collect)

GHS Classification per 29 CFR 1910.1200 (OSHA HCS 2012) and HPR (WHMIS 2015)

Not classified as hazardous.

GHS Pictograms

None.

Signal Word

None.

Hazard Statements

None.

Safe Handling Instructions: Avoid eye and skin contact. It is recommended to use safety glasses and

gloves during handling. During installation process, adequate ventilation of the

work area should be maintained. Although the adhesive is low VOC, persons

who are sensitive to odors or chemicals should avoid the work area during

installation. Keep container closed.

During normal usage of the product as recommended, airborne dusts and mists will

not be present. See Section 7 (Handling and Storage) for further details.

Hazards Not Otherwise Classified

None.

% With Unknown Acute Toxicity : Less than 1% by weight of this product is comprised of ingredients with

unknown acute toxicity.

Ingredients

CAS #

% (by weight)

No hazardous ingredients

N/Ap

100

SECTION 1 – PRODUCT AND COMPANY IDENTIFICATION

SECTION 2 – HAZARDS IDENTIFICATION

SECTION 3 – COMPOSITION/INFORMATION ON INGREDIENTS

SECTION 4 – FIRST AID MEASURES

Summary of content (7 pages)

PAGE 1
Henry 430 ClearPro Clear VCT Floor Adhesive 01-Mar-2015 ® Page 1 of 7 SAFETY DATA SHEET SECTION 1 – PRODUCT AND COMPANY IDENTIFICATION Product Identifier : Product Code : Trade Name/Synonyms : Recommended Use : Uses Advised Against : Manufacturer’s name and address: Henry 430 ClearPro Clear VCT Floor Adhesive 70010432 Henry 430 Adhesive for installing Vinyl Composition Tile (VCT). No information available. The W.W. Henry Company 400 Ardex Park Drive Aliquippa, PA 15001 USA Information Telephone No.
PAGE 2
Henry 430 ClearPro Clear VCT Floor Adhesive 01-Mar-2015 ® General Inhalation Page 2 of 7 Ingestion : Call a doctor if you feel unwell. : If a worker develops breathing problems while working with this material, remove the worker to fresh air and keep at rest in a position comfortable for breathing. : Wash with plenty of soap and water. If irritations or symptoms develop, seek medical attention/advice. : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
PAGE 3
Henry 430 ClearPro Clear VCT Floor Adhesive 01-Mar-2015 ® Prohibited materials Environmental precautions Reference to other sections Page 3 of 7 : Ventilate area of release. Stop spill or leak at source if safely possible. Contain product with inert absorbent material, preventing it from entering sewer lines or waterways. Gather up spilled material and place in suitable container for later disposal (see Section 13). Residual of product, while still wet, can be cleaned up with warm soapy water.
PAGE 4
Henry 430 ClearPro Clear VCT Floor Adhesive 01-Mar-2015 ® Page 4 of 7 pH : 8.5 – 9.5 Specific gravity Boiling point : 212°F (100°C) Coefficient of water/oil distribution : N/Av Melting/Freezing point : N/Av Solubility in water : 1.045 : Miscible Vapor pressure (mm Hg @ 20°C / 68°F) : N/Av Evaporation rate (n-Butyl acetate = 1) : N/Av Vapor density (Air = 1) Volatiles (% by weight) : N/Av : Approximately 53 – 55% Volatile organic compounds (VOCs) : 1.
PAGE 5
Henry 430 ClearPro Clear VCT Floor Adhesive 01-Mar-2015 ® Page 5 of 7 : The product should not be allowed to enter drains or water courses, or be Environmental effects deposited where it can affect ground or surface waters. Ecotoxicity Biodegradability Bioaccumulative potential Mobility in soil PBT and vPvB assessment Other adverse effects : : : : : : No data available. No data available. No data available. No data available. No data available. No data available.
PAGE 6
Henry 430 ClearPro Clear VCT Floor Adhesive 01-Mar-2015 ® Page 6 of 7 SARA TITLE III: Sec. 302, Extremely Hazardous Substances, 40 CFR 355: No Extremely Hazardous Substances are present in this material. SARA TITLE III: Sec. 311 and 312, SDS Requirements, 40 CFR 370 Hazard Classes: Not Hazardous. SARA TITLE III: Sec.
PAGE 7
Henry 430 ClearPro Clear VCT Floor Adhesive 01-Mar-2015 ® Revision date: Page 7 of 7 : 01-Mar-2015 End of Document