Installation Guide

Use for commercial and residential installations

of rubber and vinyl cove base.

440 Cove Base

• Aggressive initial grab

• No open time required

• Plasticizer migration resistant

• Easy cleanup with water

• Easy to use, easy to trowel

• Zero VOC

The W.W. Henry Company

400 Ardex Park Drive

Aliquippa, PA 15001

(724) 203-8000

1-800-232-4832

www.wwhenry.com

The Professional’s Formula For Success

™

Adhesive

ENVIRONMENTAL TECHNOLOGY

1/8” x 1/8” x 1/8” Sawtooth

3 x 3 x 3 mm Sawtooth

2 1/2” Cove Base:

1240-1360 lin. ft./4 gal

310-340 lin. ft./gal

77-85 lin. ft./quart

72-79 lin. ft./30 oz cartridge

26-29 lin. ft./11 oz cartridge

4” Cove Base:

880-960 lin. ft./4 gal

220-240 lin. ft./gal

55-60 lin. ft./quart

51-56 lin. ft./30 oz cartridge

18-20 lin. ft./11 oz cartridge

6” Cove Base:

660-720 lin. ft./4 gal

165-180 lin. ft./gal

41-45 lin. ft./quart

38-42 lin. ft./30 oz cartridge

14-15 lin. ft./11 oz cartridge

PAGE 1
The Professional’s Formula For Success™ 440 Cove Base Adhesive Use for commercial and residential installations of rubber and vinyl cove base. • Aggressive initial grab • No open time required • Plasticizer migration resistant • Easy cleanup with water • Easy to use, easy to trowel • Zero VOC ENVIRONMENTAL TECHNOLOGY 1/8” x 1/8” x 1/8” Sawtooth 3 x 3 x 3 mm Sawtooth 2 1/2” Cove Base: 4” Cove Base: 6” Cove Base: 1240-1360 lin. ft./4 gal 310-340 lin. ft./gal 77-85 lin. ft./quart 72-79 lin. ft.
PAGE 2
440 Cove Base Adhesive Description Skeleton Gun: Cut spout near tip to produce 1/8” bead. Puncture inner seal and insert cartridge. Use two 1/8” beads for 2-1/2” wall base, 3 beads for 4” wall base and 5 beads for 6” wall base. Be sure to use enough adhesive. Immediately place wall base and roll toward previously installed section using a hand roller.