SDS

Henry

440 Cove Base Adhesive Page 1 of 7
30-Sep-2015
SAFETY DATA SHEET
Manufacturer’s name and address:
The W.W. Henry Company
400 Ardex Park Dr.
Aliquippa, PA 15001 USA
Supplier’s name and address:
Refer to Manufacturer
Information Telephone No. : [phone]
Website Address : http://www.wwhenry.com
24 Hr Emergency Telephone # : CHEM-TEL: [phone] OR 1-813-248-0585 (call collect)
Product Identifier : Henry

440 Cove Base Adhesive
Product ID No. : 70010442
Trade Name/Synonyms : Henry 440
Material Use : Adhesive used for the installation of rubber and vinyl cove base.
Uses Advised Against : No information available.
GHS Classification per 29 CFR 1910.1200 (OSHA HCS 2012) and HPR (WHMIS 2015)
Not classified as hazardous
GHS Pictograms
None.
Signal Word
None.
Hazard Statements
None.
Safe Handling Instructions: Avoid eye and skin contact. It is recommended to use safety glasses and
gloves during handling. During installation process, adequate ventilation of the
work area should be maintained. Although the adhesive is low VOC, persons
who are sensitive to odors or chemicals should avoid the work area during
installation. Keep container closed.
During normal usage of the product as recommended, airborne dusts and mists will
not be present. See Section 7 (Handling and Storage) for further details.
Hazards Not Otherwise Classified
None.
% With Unknown Acute Toxicity : Less than 1% by weight of this product consists of ingredients with unknown
acute toxicity.
Ingredients
CAS #
% (by weight)
No hazardous ingredients
N/Ap
100
SECTION 1 – PRODUCT AND COMPANY IDENTIFICATION
SECTION 2 – HAZARDS IDENTIFICATION
SECTION 3 – COMPOSITION/INFORMATION ON INGREDIENTS
SECTION 4 – FIRST AID MEASURES