MSDS

Material Safety Data Sheet
Material Name: Henry Easy Release Adhesive Remover
MSDS ID: WWHC-003
____________________________________________________________
Page 2 of 8
Issue Date: 07/16/13 Revision: 1.0000
Print Date: 7/16/2013
* * * Section 4 - First Aid Measures * * *
First Aid: Eyes
Immediately flush eyes with large amounts of water, including under the eyelids, for 15-30 minutes. Remove
contact lenses if present and easy to do. Obtain immediate medical attention.
First Aid: Skin
In case of contact, immediately flush skin with plenty of water for at least 15 minutes. Wash with mild soap if
needed to completely remove material. Obtain immediate medical attention.
First Aid: Ingestion
Obtain immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious
person.
First Aid: Inhalation
If inhaled, immediately remove the affected person to fresh air. If not breathing, have qualified personnel give
artificial respiration and seek medical attention immediately.
* * * Section 5 - Fire Fighting Measures * * *
General Fire Hazards
See Section 9 for Flammability Properties.
Material is not flammable.
Hazardous Combustion Products
Under conditions of fire, material may decompose and emit oxides of nitrogen, carbon monoxide, carbon dioxide,
and/or low molecular weight hydrocarbons.
Extinguishing Media
Use extinguishing media appropriate for surrounding materials.
Fire Fighting Equipment/Instructions
Firefighters should wear full-face, self contained breathing apparatus and impervious protective clothing.
Firefighters should avoid inhaling any combustion products.
NFPA Ratings: Health: 3 Fire: 0 Reactivity: 0
Hazard Scale: 0 = Minimal 1 = Slight 2 = Moderate 3 = Serious 4 = Severe
* * * Section 6 - Accidental Release Measures * * *
Personal Precautions
Do NOT get into eyes, on skin or on clothing. Do NOT breathe vapor. Do NOT swallow. Wash thoroughly after
handling. Clean contaminated clothing before reuse. Keep container tightly closed. Use only with adequate
ventilation.
Containment Procedures
Wear appropriate personal protective equipment to prevent contact with material during clean up procedure,
including impervious gloves and safety glasses. Contain spill with inert material. Block any potential routes to
water systems.
Environmental Precautions
Prevent discharge into sewers or waterways.