SDS

Henry
®
314 ReadySet
™
Premixed Mastic Adhesive Page 1 of 7
21-Sep-2016
SAFETY DATA SHEET
Product Identifier : Henry

314 ReadySet
™
Product Code : 70012322
Trade Name/Synonyms : Henry 314
Recommended Use : A fast-grab adhesive for installing porcelain, quarry, stone, ceramic, and
mosaic tiles on floors, walls, countertops, and showers.
Uses Advised Against : No information available
Manufacturer’s name and address:
The W.W. Henry Company
400 Ardex Park Drive
Aliquippa, PA 15001 USA
Information Telephone No. : [phone] or [phone]
Website Address : http://www.wwhenry.com
24 Hr Emergency Telephone # : CHEM-TEL: [phone] OR 1-813-248-0585 (call collect)
GHS Classification per 29 CFR 1910.1200 (OSHA HCS 2012) and HPR (WHMIS 2015)
Not classified as hazardous.
GHS Pictograms
None.
Signal Word
None.
Hazard Statements
None.
Safe Handling Instructions: Avoid eye and skin contact. It is recommended to use safety glasses and
gloves during handling. During installation process, adequate ventilation of the
work area should be maintained. Although the adhesive is low in VOC,
persons who are sensitive to odors or chemicals should avoid the work area
during installation. Keep container closed. Do not subject to grinding. Dispose
of contents / container in accordance with federal, state, and local laws. Do not
allow product to enter drains.
During normal usage of the product as recommended, airborne dusts and mists will
not be present. See Sections 7 and 11 for further details.
Hazards Not Otherwise Classified
None.
% With Unknown Acute Toxicity : Less than 1% by weight of this product is comprised of ingredients with
unknown acute toxicity
Ingredients
CAS #
% (by weight)
Limestone
1317-65-3
60 – 100
Sepiolite clay
63800-37-3
0.1 – 1.0
Crystalline silica, quartz*
14808-60-7
0.1 – 1.0
SECTION 1 – PRODUCT AND COMPANY IDENTIFICATION
SECTION 2 – HAZARDS IDENTIFICATION
SECTION 3 – COMPOSITION/INFORMATION ON INGREDIENTS