Owner Instructions Warning! Read instructions before using the machine HVW 370 www.numatic.co.
Please refer to information for wet vacuum cleaners BEFORE use at rear of manual.
Carpet Cleaning Assembly 1 2 x6 x6 3 4 5 6 7 8
Carpet Cleaning Assembly 9 10 x2 8 x2 NuChem 4 INSTRUCTIONS FOR USE TEST FOR COLOUR FASTNESS Find a small area on the material which is not normally on view and test the carpet / fabric for colour fastness by rubbing with a cloth dampened with correctly diluted Nuchem 4. Do not use on velvet type materials or any materials not suitable for wet cleaning according to fabric manufacturers cleaning instructions. For Normal soiling: Pour one 40ml Measure into 5 litres of cold water.
Using your machine (Carpet Cleaning) 1 2 0 I 1 2 0 I 2 1 0 0 I I 3
Hard Floor Assembly Assemble machine steps 1-5 (Page 3) 1 2 3 4 5 6 Using your machine (Hard Floor Cleaning) 0 0 I I
Upholstery Cleaning Assembly Assemble machine steps 1-4 (Page 3) 1 2 3 Using your machine (Upholstery Cleaning) 100% Suction 70% Suction
Cleaning the machine =
Fitting the face 1 2 CLICK CLICK Removing the face 1 2
Carrying your Henry Wash & cable storage Schematic diagram
About your machine 1 2 3 4 5 6 7 8 9 Voltage Frequency Rated Input Power Weight (ready to work) Company Name & Address Model Machine yr/wk Serial number WEEE Logo Protection Class 2 Symbol 10 CE Mark Rating Label 5 11 MAX pressure 12 Splash proof rating 6 1 2 11 3 12 8 10 7 9 4 PPE (personal protective equipment) That may be required for certain operations.
Information for wet use vacuum cleaners Warning! Read the instruction manual before using the machine. Operators shall be adequately instructed on the use of these machines. As with all electrical equipment, care and attention must be exercised at all times during use, in addition to ensuring that routine and preventative maintenance is carried out periodically to ensure safe operation.
Do • • • • • • • • Make sure you DRY vacuum the carpet before washing. Keep your machine clean. Keep filters clean. Regularly clean the water level limiting float safety valve and examine for signs of damage or correct operation. Keep hoses and tubes clear. Replace any worn or damaged parts immediately. Regularly examine the power cord, if damage is found, power cord must be replaced by a qualified person using the correct Numatic original part. Keep diffuser filter (where fitted) clean.
Declaration of conformity Daily Keep the machine clean, including hoses and tubes. Regularly examine the power cord. Weekly - as daily and:Check for any worn or damaged parts and replace immediately. Do not steam clean or pressure wash.
Warranty
Numatic International Limited, Chard, Somerset, TA20 2GB Telephone: 01460 68600 Fax: 01460 68458 UNITED KINGDOM: www.numatic.co.uk GERMANY: www.numatic.de SWITZERLAND: www.numatic.ch FRANCE: www.numatic.fr NETHERLANDS: www.numatic.nl SOUTH AFRICA: www.numatic.co.za PORTUGAL: www.numatic.pt Specification subject to change without prior notice www.numatic.
