Made in America and Priced Right U.S. Survival .22 Instruction Manual Important: Please make certain to immediately return your warranty registration card. For best performance we suggest that you use American made high velocity .22LR ammunition, make sure the barrel is tightly secured to the receiver and that you clean the gun after every 100 rounds. Made In America and Priced Right IS A REGISTERED TRADEMARK OF THE HENRY REPEATING ARMS COMPANY TEL. 201-858-4400 Made in America | FAX.
Welcome andWelcome Introduction and Introduction Thank you for purchasing your new Henry Lever Action Rifle. We are proud to have crafted this rifle for you in the great tradition of Henry Repeating Arms Company which dates back to 1860 when the first effective, lever-action repeating rifle was developed by our founder, Benjamin Tyler Henry. We go to great efforts to provide the highest quality of design, craftsmanship, manufacture and function that was established over 140 years ago.
SIMPLE LIMITED LIFETIME WARRANTY Henry Repeating Arms Company stands behind its products as it has historically. We offer a simple limited lifetime warranty. If you have a problem with a Henry rifle, and it is our fault, we will fix it at any time, and at no charge. The warranty does not cover excessive wear and tear to parts, or accidental damage to parts.
CAUTIONS: GENERAL HANDLING CAUTIONS 1. ALWAYS HANDLE YOUR FIREARM AS IF IT WERE LOADED so that you never fire it accidentally when you think it is unloaded. 2. NEVER POINT YOUR FIREARM AT ANYTHING YOU DO NOT INTEND TO SHOOT so that if it fires accidentally, injury, death, or damage to property will be avoided. 3. NEVER TAKE ANYONE'S WORD THAT A GUN IS UNLOADED.
LOADING/UNLOADING CAUTIONS 13. ALWAYS BE SURE BARREL, BORE, CHAMBER, AND ACTION ARE CLEAN AND CLEAR OF OBSTRUCTIONS. Clean a fouled firearm immediately so that it will function correctly and safely. 14. ALWAYS USE ONLY CLEAN, DRY, HIGH-QUALITY, COMMERCIALLY MANUFACTURED AMMUNITION IN GOOD CONDITION AND APPROPRIATE TO THE CALIBER OF YOUR FIREARM. Gun and ammunition manufacturers design their products within exacting engineering safety limits.
27. NEVER WALK, CLIMB, OR FOLLOW A COMPANION WITH YOUR FIREARM COCKED AND READY TO FIRE to eliminate risk of accidental discharge. When hunting, hold your firearm so that you can always control the direction of the muzzle. MALFUNCTION CAUTIONS 28.FAILURE TO FIRE: IF THE FIREARM FAILS TO FIRE DO NOT PUT IT DOWN OR OPEN THE ACTION. ALWAYS HOLD THE FIREARM, KEEPING IT POINTED IN A SAFE DIRECTION AND WAIT 30 SECONDS. IF A HANGFIRE (SLOW IGNITION) HAS OCCURRED, THE ROUND WILL FIRE WITHIN 30 SECONDS.
ammunition in the appropriate caliber but not all ammunition produces the same result. Henry RAC recommends that after you read and understand this manual, you go to the range and fire different ammunition which is appropriate to the caliber of your firearm. Once you find the ammunition which functions best, keep using it. Especially when cutting-edge reliability and accuracy are vital to you. When sighting your rifle, shoot a group to determine point of impact on the target.
3. Insert the magazine in the magazine well, an opening at the bottom of the receiver. Grasp the charging handle knob with thumb and index finger and pull straight out to the right. This will allow the shooter to “hook” the index finger around the handle in order to work the action. 4. Pull the charging handle fully to the rear and then release it to allow the bolt to move forward. WARNING The firearm is now ready to fire. Do not touch the trigger unless you intend to fire. TARGET RIGHT 5.
springs and action spring guide. 5. For reassembly, reverse the disassembly instructions. 6. Repair parts are available through the Henry RAC parts department. In the following pages you will find a parts diagram. A parts price listed can be ordered by calling (718) 499-5600, fax (718) 7688056 or e-mail to info@henryrepeating.com HOW TO DISASSEMBLE YOUR HENRY U.S. SURVIVAL RIFLE 1. Make certain that your rifle is not loaded. and wipe off the metal surfaces. Then apply a new film of oil.
ILLUSTRATION OF PARTS 33 07 35 04 26 15 25 34 14 13 36 37 08 01 31 24 05 11 18 19 32 09 12 38 27 03 10 28 02 29 30 22 LIST OF PARTS Receiver Sideplate Sideplate screw Barrel assembly Barrel nut Front sight Stock w/ cap Stock cap only Stock takedown nut Stock takedown screw Stock takedown rollpin Bolt Charging handle Magazine complete Magazine latch Magazine latch spring Safety plate/shaft Safety det ball 10 Made In America and Priced Right $8.95 $2.00 $44.95 $8.95 $2.75 $34.95 $6.
PARTS An illustration and list of part names are included in this manual. Please note that not all parts are available for sale. Those parts which are available should be installed by a licensed gunsmith. When ordering parts, please give part name and part number. Important: If you make unauthorized adjustments or use unauthorized parts, Henry Repeating Arms Company will not assume responsibility for the proper functioning of the rifle.