User's Guide

ResetWPS
Primary
SIM2
SIM2
Rx Div
WiFi1
SIM1
Service
WiFi2
ResetWPS
Primary
SIM2
SIM2
Rx Div
WiFi1
SIM1
Service
WiFi2
Insert SIM cards & attach antennas or cables for
cellular (Primary & RX Div) and WiFi
SIM2
Connect to a PC or laptop by ethernet cable
either directly or via an ethernet hub
SIM1
Connection to the web interface is required to
configure the Hera600. This can be achieved by
wired ethernet connection or WiFi
Insert the power connector. Plug the mains adapter
into a dedicated socket & switch on
To configure the cellular connection refer to the
documentation supplied by the equipment provider
relating to the SIM
Ÿ Username
Ÿ Pin code
Once logged into the web interface, choose a
profile name, enter the information above and tick
the 'enable' box
Information required for connection:
Ÿ Password
Ÿ APN (Access Point Name)
Never insert or remove SIM cards while
the Hera600 is powered
using username and password
Open a web page on your PC or laptop, and type
into the address bar then http://192.168.1.1
press enter
Enter the username and password and click OK to
log into the Hera web interface
Note: Appearances may vary according to
operating system and web application.
Information supplied by your equipment
provider overrides any information shown
above
Press the WPS button
If there is no SSID information on the Hera600 label,
use a wired connection to connect to the Hera600
web interface
WiFi
Cellular
using WPS
600 Series Router
Quick start guide
4: Cellular connection
3: Web interface
2a: Wired connection
2b: WiFi connection
Link1 Link2 Link3 Link4100 100 100 100
Serial 1
Power
Serial 2
HUB
Ethernet LAN
Link1 Link2 Link3 Link4100 100 100 100
Serial 1
Power
Power
SSID
WiFi username
WiFi passphrase
Internet application
Address:
http://192.168.1.1
username:
password:
admin
admin
Configur
e
WiFi
Enable
WPS
mode
1: Getting started
2c: WiFi connection
This quick start guide provides basic connection information only.
For full feature information download the latest comprehensive user
guide from:
www.eseye.com/hera-documentation
Serial 2
Hera 600
!
Power
LAN
WIFI
WAN
Signal
Front
Back
WiFi light illuminated
Profile Name APN User Password SIM USSD
save
Mobile Connection Enable
Features parts & appearance may vary to those shown.
Declaration of Conformity
WEEE Directive 2012/19/EU
Declare under sole responsibility that the product family Hera600
Ecodesign Directive 2009/125/EC
The Low Voltage Directive 2014/35/EU
RoHS Directive 2015/863/EU
We: Eseye Design Limited
Batteries Directive 2013/56/EU
Radio Equipment Directive (RED) 2014/53/EU
20 Nugent Road, Surrey Research Park,
Guildford, Surrey, GU2 7AF, UK
to which this declaration relates, is compliant with the essential
requirements of:
The EMC Directive 2014/30/EU
Signed ....................
Name Jon Darley
Position Director of Things
Year of affixing CE Mark 2019
Place and date of issue Guildford July 2019
Manufactured by Eseye Design Ltd in China
If there is no SSID information on the Hera600 label,
use a wired ethernet to connect to the Hera600
web interface
a: Ensure the WiFi light on the Hera600 is illuminated
b: Search wireless networks on your WiFi enabled
Hera600 label
network which matches the SSID on the
laptop, PC, tablet or phone. Connect to the
c: Enter the WiFi username and passphrase exactly
as it appears on the label when prompted
ESN
BASE MAC
04423000003170000010
00D04C0046CA
PROD PART NO
IMEI
012345678912345
SSID
DATAFLEX_0046CA
PASSPHRASE
0046CA0010
Manufactured by Dataflex Design Communications Ltd
H604ESEYESUCK01
Hera 804
QSIM251US Issue 2
Configure your computing
device to connect to WiFi in
WPS mode
The WPS function will automatically set up a
secure connection between your router and
computer