Datasheet

Platinum Resistance Temperature Detector SMD 1206 (V)
We reserve the right to make alterations and technical data printed. All technical data serves as a guideline and does not guarantee particula
r
properties to any products.
Heraeus Sensor Technology GmbH, Reinhard-Heraeus-Ring 23, 63801 Kleinostheim,Germany
Phone: [phone], Fax: [phone], E-Mail: [e-mail], Web:www.heraeus-sensor-technology.com
Status: 04/2004
The PRTD SMD 1206 is designed for automatic mounting in large volume applications on printed circuit
boards where long time stability, interchangeability combined with low costs are important.
Nominal Resistance R
0
Tolerance Order No.
100 Ohm at 0°C DIN EN 60751, class B
DIN EN 60751, class 2B
32 207 590
32 207 589
1000 Ohm at 0°C DIN EN 60751, class B
DIN EN 60751, class 2B
32 207 595
32 207 594
Specification DIN EN 60751 (according to IEC 751)
Temperature range - 50 °C to + 130 °C (Possible working temperatures using volume
expansion aligned conductor board material: 150°C)
Temperature coefficient TCR = 3850 ppm/K
Soldering connection end-termination galvanic tin plated
with Ni-barrier
Long term stability max. R
0
-drift 0.06 % after 1000 h at 130 °C
Environmental conditions unhoused for dry environments only
Insulation resistance > 100 MΩ at 20 °C;
> 2 MΩ at 130 °C (glass covering)
Measuring current 100Ω: 0.3 to 1.0 mA
1000Ω: 0.1 to 0.3 mA
(self heating has to be considered)
Self heating 0.4 K/mW at 0 °C
Response time water current (v = 0.4 m/s): t
0.5
= 0.15 s;
t
0.9
= 0.30 s
air stream (v = 2 m/s): t
0.5
= 3.5 s; t
0.9
= 10 s
Processing instructions face up-mounting: reflow soldering or wave soldering,
e. g. double wave < 8s / 235 °C
Storage life Min. 9 months (in dry environment)
Packaging „Face-up“ in blister reel, 4000 pcs / reel
Note
Other tolerances and values of resistance are available on request