OSHA Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET #
Climate Smooth Soldering Paste
Date Prepared:
3/3/1994
Last Reviewed:
4/14/2009
Hercules Chemical Company Inc.
111 South Street
Passaic NJ 07055
Phone [phone]
Fax [phone]
Section 1
4
This Material Safety Data Sheet (MSDS) was requested moments ago
from Hercules Automated Fax Information System. Please forward it
immediately to the person in charge of MSDS's, or retain it at the
machine until claimed.
OSHA-Required Health And Safety Information!
Meets OSHA 29 CFR 1910.1200
1.0mg/M³ 1.0mg/M³ N/A
26%
HMIS Hazard Rating:
Health: 2 Flammability: 1 Reactivity: 1 Personal Protection: C
N/A
Specific Gravity
(H2O = 1):
0.95
Vapor Density
(Air = 1):
N/A
Melting Point (° F):
120-140
Evaporation Rate:
(Butyl Acetate = 1)
<1
Solubility in Water:
Very slightly soluble
Amber to brown color paste
Odor:
None
Flash Point:
580° F (Min) COC
Flammable Limits:
N/A
LEL: UEL:
Extinguishing Media:
Dry Chemical or Carbon dioxide or water fog.
Special Firefighting Procedures:
Do not use a direct stream of water. Product will float & can be reignited on surface of water. Do not enter confined
fire space without proper protective equipment.
Unusual Fire And Explosion Hazards:
When heated above its flash point, this material will release flammable vapors which can burn or be explosive in
confined areas. Keep away from extreme heat and open flame.
Section 2 - Hazardous Ingredients/Identity Information
Hazardous Components (Specific Chemical Identity;
Common Name(s), CAS Numbers)
Upper Bound
Limit if SARA
Reportable
Zinc chloride (7646-85-7)
Section 3 - Physical/Chemical Characteristics
Boiling Point (°F): Vapor Pressure
(mm Hg):
N/A
Appearance And Color:
Section 4 - Fire And Explosion Hazard Data
OSHA PEL ACGIH TLV Other Limits
Continued on Next Page
VOC Level (g/l):
14