Product Overview

SUBMITTAL SHEET: Climate Smooth™
1
SPECIFICA
TIONS:
C
limate Smooth
™
HCC Holdings, Inc.
4700 West 160th Phone: [phone]
Cleveland, Ohio 44135 Website: www.Oatey.com
CLIMATE SMOOTH™ Date: August 2017
Soldering Paste
APPROVALS & LISTINGS
Conforms to Commercial Item Description A-A-51145 (supersedes O-F-506C).
SPECIFIC USES
Use Climate Smooth for sweat soldering on most common metals. Brushable in cold or hot
climates all year long.
SPECIFIC APPLICATIONS*
Climate Smooth is a self-cleaning, lead-free formula made to withstand extreme temperatures
when soldering.
*For special applications which may not be covered on this or other Oatey literature, please contact Oatey Technical
Services Department by phone [phone], or fax [phone], or visit our technical database web-site at
www.Oatey.com.
DIRECTIONS FOR USE
Apply thin coat of soldering paste to surface to be soldered. When soldering tubes and fittings, a
square cut, no burrs, proper fit and clean surface assure best results. Heat to proper temperature
for soldering. Feed sufficient solder into the joint. Allow to cool. Use a damp cloth to wipe flux
residue. Note: To avoid residual corrosion avoid excessive use of flux, especially on cold water
piping.
Lead-free, non-acid soldering flux. Applies easily to all surfaces, smooth, non-
runny soldering paste cleans as it fluxes. Use Climate Smooth for sweat soldering on
most common soldering metals including copper, brass, galvanized, tin, zinc and
more. Specially formulated to be brushable at extreme temperatures all year long in
virtually all climates. Retards and dissolves oxides during heating, even penetrates
light oil film. Solders spread faster and more uniformly in the joint when used with
Climate Smooth. Works with all solders, including higher melting, non-lead bearing
alloys, plus 95/5, 50/50, 40/60 and 60/40 solders.