Product Overview

SUBMITTAL SHEET: Jel-Flux®
2
SPECIFICATIONS: Jel
-Flux®
SIZE & PACKING
STOCK NUMBER
SIZE
PACKING
WEIGHT/CASE
10810*
4 fl. oz.
24
9.5 lbs.
10815*
8 fl. oz.
24
17.8 lbs.
*Dauber in Cap
DIRECTIONS FOR USE
Apply a coat of Jel-Flux to surfaces to be soldered. When soldering copper tube and fittings,
square cuts, no burrs, proper fit and clean surfaces assure best results. Heat joint only until hot
enough to melt solder in contact with metal on opposite side of fitting. Remove heat and feed
sufficient solder into the joint. Reheat only if necessary to add more solder. Gently wipe off
excess molten solder and flux residue.
PHYSICAL PROPERTIES
Solubility in water: 100% miscible in water.
Appearance/color/odor: Thick, low flow liquid. Translucent yellow color. Odorless.
WARNINGS OR CAUTIONS
 Read all cautions and directions carefully before using product.
 Keep out of reach of children.
 Contains zinc chloride. Harmful if swallowed, can cause severe internal damage.
 Eye contact can cause irritation, discomfort, blurred vision.
 Prolonged skin contact can cause irritation with rash.
 Avoid inhaling fumes while soldering.
 Use dauber or brush; do not apply with fingers. Wash hands after using.
MATERIAL SAFETY INFORMATION
FOR MORE INFORMATION ON THIS PRODUCT, REQUEST SAFETY DATA SHEET (SDS) #1615E
For Delivery By Fax
Call 1-800-321-9535
Internet
See SDS section of www.Oatey.com
HMIS® ratings Health: 3
Flammability: 0
Physical hazard: 0