ANSI Material Safety Data Sheet

Hercules Chemical Company, Inc. MSDS # 306 - Cloroben PT Bio1
_
______________________________________________________________________________________
Cloroben PT Bio1– MSDS # 306 Page 2 / 5
3. COMPOSITION/INFORMATION ON INGREDIENTS
Component CAS No. Amount
Bacterial Cultures Not Applicable 1-5%
Alkanolamide 61791-31-9 1-5%
Alcohol Ethoxylate 68439-46-3 1-5%
Nonionic Surfactant 127087-87-0 1-5%
Water 7732-18-5 90-100%
4. FIRST AID MEASURES
Eye: Immediately flush victim's eyes with large quantities of water for at least 15 minutes, holding the eyelids apart.
Remove contact lenses if present. Get immediate medical attention.
Skin: Wash with soap and water. Remove contaminated clothing and shoes. Launder clothing before re-use. Get medical
attention if irritation or symptoms develop.
Ingestion: If conscious, rinse mouth thoroughly with water and give water or milk to dilute. Never give anything by
mouth to an unconscious or convulsing person Get immediate medical attention. Do not induce vomiting unless directed to
do so by medical personnel.
Inhalation: Immediately remove victim to fresh air. Get medical attention if breathing becomes difficult.
Other: Note to physician: Bacterial organisms in this product are not pathogenic, but can cause infection in contact with
open wound. These organisms are susceptible to commonly used antibiotics.
5. FIRE FIGHTING MEASURES
Flashpoint: None
Autoignition Temperature: Not applicable
Flammable Limits: LEL Not applicable UEL Not applicable
Unusual Fire or Explosion Hazards: None.
Special Fire-Fighting Instructions: Firefighters should wear positive pressure self-contained breathing apparatus and full
protective clothing.
Hazardous Combustion Products: None.
Explosion Data (sensitivity to mechanical impact or static discharge): None known.
6. ACCIDENTAL RELEASE MEASURES
Wear appropriate protective clothing as described in Section 8. Do not flush spill to sewer. Collect using an inert
absorbent material and place in appropriate containers for disposal. Prevent large spills from entering sewers and water
courses. Report releases as required by local, provincial and federal authorities.
7. HANDLING AND STORAGE
Handling: Prevent contact with the eyes, skin and clothing. Avoid spraying, splashing and misting conditions. Avoid
breathing mists. Do not ingest. Avoid contact with food. Wash thoroughly with soap and water after handling. Keep
containers closed when not in use.
Do not reuse containers. Empty containers retain product residues can be hazardous. Follow all MSDS precautions when
handling empty containers.
Storage: Store in a cool, dry area away from incompatible materials. Store at room temperature or cooler. Avoid
temperatures above 32°C. Keep from freezing.