Submittal Sheet

Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | 800.203.1155 | Oatey.com
Oatey Co. is part of the Oatey family of companies
TAPE DOPE
®
P
Product
Number
Size Packing Weight UPC Code
15124
1/2" x 500"
24
15127 1/2" x 750" 24 3.0 lbs 032628-151277
15136
3/4" x 500"
12 1.7 lbs 032628-151369
PRODUCT SELECTOR
TAPE DOPE
®
HIGH DENSITY PROFESSIONAL
GRADE PTFE THREAD SEALANT
TECHNICAL SPECIFICATION
PRECAUTIONS
• Read all cautions and directions carefully before using product.
• Avoid prolonged exposure to fumes given off at temperatures over 500° F.
• Should not be used on high-speed shafts where the surface speed
exceeds 150 sfpm.
DIRECTIONS
1. Hold roll in the palm of the hand. Lay end of tape dope on male
threads as close as possible to base end of threads. Hold end of
tape dope firmly and apply clockwise on standard threads stretching
tightly as you wind.
2. Continue to wind and stretch tape dope tightly so tape seats in threads;
once around on joints less than 2", twice around on 2" and larger sizes.
3. Complete circle and overlap starting point about 1/2". Since tape dope
has no adhesive, be sure to continue holding tightly until tape is firmly
overlapped. Final wrap should not extend past terminal end of threads.
4. Tear tape dope by pulling in the same direction as you were winding
until it separates. Smooth torn end by running fingers over it in the
same direction it was applied. Tape dope will adhere to itself. Make
up joint or connection in normal manner. Be aware that PTFE has
substantial lubricating qualities and over tightening is possible if
precautions are not taken.
MATERIAL SAFETY INFORMATION
FOR MORE INFORMATION ON THIS PRODUCT, REQUEST SAFETY
DATA SHEET
For Delivery by Fax Call 1-800-321-9535
Internet See SDS section of www.Oatey.com
HMIS
®
ratings
Health: 0
Flammability: 0
Physical hazard: 0