Submittal Sheet

Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | 800.203.1155 | Oatey.com
Oatey Co. is part of the Oatey family of companies
Job Name Item #
Location
Engineer Contractor
PO # Tag
Representative
PRO DOPE
®
THREAD SEALANT
TECHNICAL SPECIFICATION
8/19
PRO DOPE
®
P
Product
Number
Size Packing Weight
15420 1/2 pt.** (1 lb.) 24 22.8 lbs.
15427 1 pt.** (2 lb.) 12 22.5 lbs.
15433 6 lb. pail*** 6 39.0 lbs.
15435 1 gal. pail 4 59.0 lbs.
15445 5 gal. pail*** 1 72.0 lbs.
**Brush in Cap ***Plastic Pail w/Handle
DESCRIPTION
• A versatile thread sealant for use on black iron, galvanized steel,
copper, brass and aluminum pipe and fittings. Can be used on lines
carrying natural gas, air, steam, hydronic heating, ammonia, brine,
diluted acids and sprinkler systems.
• Pro Dope will not drip, is lead free, non-toxic and won’t spill. It is
non-separating and provides a tight, positive, leak free seal. Pro Dope
prevents rust and inhibits corrosion by forming a protective coating on
threads. It is non-hardening and joints can be disassembled without
damage to pipe fittings or threads.
• Pro Dope is easily applied with a natural bristle brush.
APPROVALS & LISTINGS
Listed to NSF/ANSI 61
This product is not classified as hazardous in accordance
with 29 CFR OSHA 1910.1200.
APPLICATION / USES
Pro Dope can be used on these materials:
• Aluminum
• Black Iron
• Galvanized Steel
• Stainless Steel
• Brass
• Copper
• Monel
• Many others
Pro Dope can be used on lines carrying:
• Acids-Dilute
• Air (compressed gaseous)
• Ammonia Anhydrous
• Ammonia Gaseous
• Brine
• Carbon Dioxide
• Castor Oils
• Caustic Alkalies (dilute)
• Helium Gaseous
• Inert Gases
• Natural Gas
• Nitrogen Gaseous
• Soap Liquid
• Steam Lines
• Vegetable Oils
• Water (hot & cold)
• Many other uses
*For special applications which may not be covered on this or other Oatey literature,
please contact Oatey Technical Services Department by phone [phone], or
fax [phone], or visit our technical database web-site at www.Oatey.com.
PHYSICAL PROPERTIES
PHYSICAL PROPERTIES
Appearance/color Gray colored thread sealant
Pressure Rating
250 psi for liquids and 200 psi for
air/steam
Temperature Performance* 0°F to 350°F
Brushability -15°F to 122°F
MATERIAL SAFETY INFORMATION
FOR MORE INFORMATION ON THIS PRODUCT, REQUEST SAFETY
DATA SHEET
For Delivery By Fax Call 1-800-321-9535
Internet See SDS section of www.Oatey.com
HMIS
®
ratings
Health: 0
Flammability: 1
Physical hazard: 0
PRECAUTIONS
Read all cautions and directions carefully before using this product. Not
recommended for use on lines carrying concentrated acids and alkalis, ketones,
oxygen or L.P. (liquified petroleum). Keep from freezing.
DIRECTIONS
Remove excess cutting oil from threads and apply Pro Dope to clean male
threads. Brush well into the roots of the threads to ensure a leak free joint.
Then complete the connection as usual.
PRODUCT SELECTOR
*Temperature at which pipe joint compound will function