MSDS

Hercules Chemical Company, Inc. MSDS # 383 - HERCULES Gripp
_
______________________________________________________________________________________
HERCULES Gripp – MSDS # 383
Page 2 / 4
3. COMPOSITION/INFORMATION ON INGREDIENTS
Component CAS No. Amount
Isopropanol 67-63-0 10-20%
Talc 14807-96-6 25-35%
Rosin 8050-09-7 20-30%
Fumed Silica 112945-52-5 1-5%
quartz 14808-60-7 <0.5%
Graphite 7782-42-5 1-5
Castor Oil 68187-84-8 10-20%
4. FIRST AID MEASURES
Eye: Flush victim’s eyes with large quantities of water for fifteen minutes holding the eyelids apart. Get medical
attention if irritation persists.
Skin: Wash with soap and water. Remove all contaminated clothing.
Ingestion: Do not induce vomiting. If conscious, give large quantities of water or milk. Get immediate medical
attention.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Get medical attention.
5. FIRE FIGHTING MEASURES
Flashpoint: 175°F T.C.C.
Flammable Limits: LEL 2% UEL 12% (based on Isopropyl Alcohol)
Autoignition Temperature: Not applicable
Extinguishing Media: Use water fog or spray, carbon dioxide, dry chemical or foam.
Unusual Fire or Explosion Hazards: Classified as combustible, will burn under fire conditions.
Special Fire-Fighting Instructions: Firefighters should wear positive pressure self-contained breathing
apparatus and full protective clothing.
Hazardous Combustion Products: Burning may produce carbon monoxide, carbon dioxide and unidentified
hydrocarbons.
Explosion Data (sensitivity to mechanical impact or static discharge): None known.
6. ACCIDENTAL RELEASE MEASURES
Extinguish all ignition sources. Use absorbent material to pick up small spills. For large spills Collect with inert
absorbent and place in container for proper disposal.
7. HANDLING AND STORAGE
Handling: Avoid contact with the eyes. Keep containers closed when not in use. Use with adequate ventilation.
Storage: Keep away from heat, sparks and flame.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Guidelines:
Isopropanol 200 ppm ACGIH TLV400ppm OSHA Pel
Talc 2 mg/m3 ACGIH TLV (respirable dust)
Quartz 2 mg/m3 ACGIH TLV (respirable dust)
Non-Hazardous Ingredients None Established
Engineering Controls: None required for normal use.