Submittal Sheet

Oatey Co. | 20600 Emerald Parkway, Cleveland, OH 44135 | 800.203.1155 | Oatey.com
Oatey Co. is part of the Oatey family of companies
GRRIP
™
PIPE JOINT
& GASKET SEALANT
TECHNICAL SPECIFICATION
PRECAUTIONS
Read all cautions and directions found on the product label carefully before
using this product. Combustible mixture. Do not use near fire or flame. Not for
use on natural rubber, synthetic rubber, strong or concentrated acids, alkalis
and oxygen carrying lines. Do not use for alcohol or gasohol. Not for use on
CPVC (use Hercules Megaloc
™
).
DIRECTIONS
FOR THREADED JOINTS: Apply Grrip to clean male threads, brushing
well into the root of the threads. Assemble as usual.
FOR FLANGES AND GASKETS: Apply a coat of Grrip to both sides of
flange and gasket. Allow to set five minutes. Then assemble.
KEEP CONTAINER CLOSED TIGHTLY WHEN NOT IN USE
MATERIAL SAFETY INFORMATION
FOR MORE INFORMATION ON THIS PRODUCT, REQUEST SAFETY
DATA SHEET
For Delivery by Fax Call 1-800-321-9535
Internet See SDS section of www.Oatey.com
HMIS
®
ratings
Health:2
Flammability: 2
Physical hazard: 0