Technical Specifications

Megaloc
Thread Sealant
SPEC SHEET #S0089
Hercules Chemical Company, Inc.
111 South Street, Passaic, NJ 07055-9100
Phone: [phone] • Fax: [phone]
e-mail: [e-mail]
http://www.herchem.com
APPROVALS AND LISTINGS
SPECIFIC USES
For Delivery by Fax Call 1-800-942-4636
Internet See MSDS section of
www.herchem.com
Mail Contact Hercules at address below or
any Hercules representative
SPECIFIC APPLICATIONS*
MEGALOC can be used on these materials:—Aluminum,
Black Iron, Brass, Copper, Glass, Monel, Fiberglass
(reinforced), Polyethylene, Nylon Plastic, PVC, CPVC, ABS,
Stainless Steel, Galvanized Steel, and many others.
PHYSICAL PROPERTIES
Pressure Rating: Liquids 12,000 psi
Gases 2,600 psi
Temperature Performance -50°F to 400°F
Brushability -25°F
WARNINGS OR CAUTIONS
MEGALOC is not recommended for use on lines carrying
concentrated acids and alkalis, ketones, and oxygen.
DIRECTIONS FOR USE
For best results apply MEGALOC to clean, dry male
threads, brushing well into the roots of the threads. Finished
joints can be tested and put into service at once.
MATERIAL SAFETY INFORMATION
FOR MORE INFORMATION ON THIS PRODUCT,
REQUEST MATERIAL SAFETY DATA SHEET (MSDS) #89.
This product is not classified as hazardous in accordance
with 29 CFR OSHA 1910.1200.
HMIS Hazard Warning 0-0-0-A
INGREDIENTS CAS#
NJ-T.S.R. #31348300 5005P, 5009P, 5010P, 5012P, 5015P
*For special applications which may not be covered on this or
other Hercules literature, please contact Hercules Technical
Services Department by phone [phone],
or fax [phone], or visit our technical database
web-site at www.herchem.com.
®
Standard 61 for
potable water.
Meets C.S.A. requirements 4-90. Working Temperature Range
-40° F to 125° F. Maximum Working Pressure 125 psi. For use with
Natural Gas & LP Gases (VAPOR STATE ONLY). Use on Steel,
Galvanized Steel, Iron, Brass, Copper, Stainless Steel & Aluminum
for pipe sizes up to and including 2”.
Approved for listing by
IAPMO / UPC.
Meets MIL. SPEC. TTS-1732 and MIL. A-12342a (CE.)
MEGALOC can be used
on lines carrying:
Acids (dilute)
Air (compressed
gaseous)
Brine
Butane Gas
Carbon Dioxide
Castor Oils
Caustic Alkalis (dilute)
Cutting Oils
Diesel Fuel Oil
Ethylene Glycol
Fatty Acid (liquid)
Freons (all)
Gasoline
Glycerine
Heating Oils
Helium (gaseous)
Hydraulic Oils
Hydrogen
Inert Gases
Jet Fuel
Kerosene
Liquefied Petroleum
Gases
Lubricating Oils
Mineral Oils
Natural Gas
Nitrogen (gaseous)
Petroleum Solvents
Potable Water
Propane
Propylene Glycol
Soap (liquid)
Steam Lines
Vegetable Oils
Water (cold & hot)
and many other uses*
©2007 HCCI / KA / EW / 0307 / 2000
ISO 9001: 2000 Certified