MSDS

Hercules Chemical Company, Inc. MSDS # 305 - HERCULES Megaloc
_
______________________________________________________________________________________
HERCULES Megaloc – MSDS # 305
Page 2 / 5
3. COMPOSITION/INFORMATION ON INGREDIENTS
Component CAS No. Amount
Petroleum-based Lubricating Oil 64741-88-4, 64742-54-7, 64742-70-7 30-60%
Talc 14807-96-6 10-30%
Kaolin 1332-58-7 10-30%
Titanium Dioxide 13463-67-7 1-5%
Silica, amorphous, fumed 112945-52-5 0.5-1.5%
Poly (P-phenylenediamine
terephthalamide)
26125-61-1 1-5%
Non-Hazardous Ingredients Mixture 10-30%
4. FIRST AID MEASURES
Eye: Flush victim’s eyes with large quantities of water, holding the eyelids apart. Get medical attention if
irritation persists.
Skin: No first aid is required. Wash with soap and water after use.
Ingestion: Do not induce vomiting. Get immediate medical attention.
Inhalation: No first aid is required. Inhalation is not a normal route of exposure for this product.
5. FIRE FIGHTING MEASURES
Flashpoint: Not applicable
Flammable Limits: Not applicable
Autoignition Temperature: Not applicable
Extinguishing Media: Use water fog or spray, carbon dioxide, dry chemical or foam.
Unusual Fire or Explosion Hazards: Not classified as flammable or combustible but will burn under fire
conditions.
Special Fire-Fighting Instructions: Firefighters should wear positive pressure self-contained breathing
apparatus and full protective clothing.
Hazardous Combustion Products: Burning may produce carbon monoxide, carbon dioxide and unidentified
hydrocarbons.
Explosion Data (sensitivity to mechanical impact or static discharge): None known.
6. ACCIDENTAL RELEASE MEASURES
Collect with inert absorbent and place in container for disposal. Report releases as required by local, provincial
and federal authorities.
7. HANDLING AND STORAGE
Handling: Avoid contact with the eyes. Keep containers closed when not in use.
Storage: Store in a cool, dry area.