Technical Specifications

SUBMITTAL SHEET: Boiler Liquid
1
SPECIFICATIONS:
Boiler Liquid
HCC Holdings, Inc.
4700 West 160th Phone: [phone]
Cleveland, Ohio 44135 Website: www.Oatey.com
BOILER LIQUID Date: August 2017
Stop-leak
APPROVALS & LISTINGS
Not applicable.
SPECIFIC USES
Use Boiler Liquid to repair leaks in steam and hot water boilers.
SPECIFIC APPLICATIONS*
For use on all hydronic systems including those with rubber or plastic components.
*For special applications which may not be covered on this or other Oatey literature, please contact Oatey Technical
Services Department by phone [phone], or fax [phone], or visit our technical database web-site at
www.Oatey.com.
Seals and repairs cracks or leaks in steam or hot water heating boilers.
Prevents steam boiler surging and will not clog or coat submerged hot water
heating coils, controls, vents or valves. Makes a strong, lasting repair on difficult
leaks in steam boilers. Tough seal expands and contracts with heat, resists
pressure, and is not affected by boiler cleaners. Will not cause priming or
foaming.
Boiler Liquid combines instantly with water in the boiler. As the water
leaks through the crack, it is vaporized and the oxygen in the air transforms the
Boiler Liquid into a strong, solid substance. The heat generated by the boiler
further hardens the seal. Contains no petroleum distillates and is safe to use in
boilers and systems with plastic or rubber components.
Boiler Liquid can be used on new installations to repair leaky joints, sand
holes, etc., which may appear after an installation is completed. Ideal for older
installations where corrosion causes leaks and cracks that need to be sealed.