Technical Specifications

ITEM 35272
Waterproof pH Tester
with Replaceable
Electrode w/ accuracy
±0.1 pH
Using anti-freeze within the recommended levels of concentration ensures
efficiency of heat transfer. A portable electronic pH tester is ideal for checking
acidity or alkalinity of heating or potable water systems as well as many other
water-based solutions on the work site.
The portable electronic pH tester has completely redesigned to benefit
from decades of manufacturing experience. The casing is much more rugged
and has been ergonomically enhanced to better fit your hand. The new design of
these testers also features a larger LCD so measurements are easier to read
from any angle. Each instrument comes with a protective cap that can be used
as a measurement vessel. The electrode is replaceable by the operator. In fact,
the whole printed circuit board can be pulled out, repaired and replaced. With the
latest innovation in non-clogging fiber junction the meter lasts much longer. You
can simply pull out 1-2 mm (1/8") of the junction fiber and completely renew it.
The temperature sensor is exposed and hence compensation is performed more
rapidly. These testers have been the standard bearers of quick, on-the-spot
testing of pH. With the new improvement, the best just got better.
pH -2.0 to 16.0 pH Range
Temperature -5.0 to 60.0°C / 23.0 to 140.0°F
pH 0.1 pH Resolution
Temperature 0.1°C / 0.1°F
pH ±0.1 pH Accuracy
Temperature ±0.5°C / ±1°F
pH Calibration automatic, at 1 or 2 points with 2 sets of memorized buffers
(pH 4.01 / 7.01 / 10.01 or pH 4.01 / 6.86 / 9.18)
Temperature
Compensation
automatic
Battery Type / Life 4 x 1.5V with BEPS / approx. 300
hours of continuous use;
auto-off after 8 minutes of non-use
Environment -5 to 50°C (23 to 122°F); RH max
100%
Dimensions 163 x 40 x 26 mm (6.4 x 1.6 x 1.0")
Weight 100 g (3.5 oz.)
Prod. No. Pack Note Bar Code
35272 1 PH Meter 032628352726
To special order these items, please contact Hercules Customer Service Dept at
800-221-9330 (FAX [phone]) or Email: [e-mail]