SDS

Material Name: Sludgehammer Universal Corrosion Inhibitor
____________________________________________________________
Page 3 of 6
Issue Date 7/16/2014 Revision 1.0000
Print Date: 7/16/2014
Environmental Precautions
None.
Prevention of Secondary Hazards
None.
* * * Section 7 - Handling and Storage * * *
Handling Procedures
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin and eyes.
Storage Procedures
Keep containers tightly closed in a cool, well-ventilated place. Keep out of the reach of children.
Incompatibilities
None known based on information supplied.
* * * Section 8 - Exposure Controls / Personal Protection * * *
Component Exposure Limits
ACGIH, OSHA, and NIOSH have not developed exposure limits for any of this product's components.
Engineering Measures
Provide adequate local exhaust ventilation to maintain worker exposure below exposure limits.
Personal Protective Equipment: Respiratory
If airborne concentrations are above the applicable exposure limits, use NIOSH approved respiratory protection.
Personal Protective Equipment: Hands
No special protective equipment required.
Personal Protective Equipment: Eyes
Safety glasses with side-shields.
Personal Protective Equipment: Skin and Body
No special protective equipment required.
* * * Section 9 - Physical & Chemical Properties * * *
Appearance:
Transparent
Odor:
None
Physical State:
Liquid
pH:
8.0 – 9.0
Vapor Pressure:
ND
Vapor Density:
ND
Boiling Point:
100°C / 212°F
Melting Point:
ND
Solubility (H2O):
Soluble
Specific Gravity:
1.03
Evaporation Rate:
ND
VOC:
0 g/L
Octanol/H2O Coeff.:
ND
Flash Point:
>100°C / 212°F
Flash Point Method:
NA
Upper Flammability Limit
(UFL):
NA
Lower Flammability Limit
(LFL):
NA
Burning Rate:
NA
Auto Ignition:
NA
* * * Section 10 - Chemical Stability & Reactivity Information * * *
Chemical Stability
This is a stable material.
Hazardous Reaction Potential
Will not occur.
Conditions to Avoid
None